Air Tool Pet Hair Removal for Detailers: Furnado and Furicane

Pet hair jobs are where interior time goes. A lab-hair cargo area or a carpet full of beach sand can turn a two-hour interior into four. Most detailers already own an air tool for blowing out vents and seams. Paired with a silicone pet hair tool, that same air gun becomes a scrub brush.

This post covers how the Buff Brite air-tool attachments work, which one fits the gun you own, and where each fits into an interior job.

How air plus silicone works

A Fur Eel Pro II on a vacuum lifts hair by dragging polymeric silicone teeth across the fabric. Put that same tool on a rotating-air gun and the teeth now move on their own, scrubbing the surface while the air loosens hair, sand and grit. You then vacuum what has been lifted, or use a tool that vacuums at the same time.

There are two ways to set this up.

Option 1: Furnado (air gun attachment)

The Furnado replaces the factory trumpet cone on your air gun with a cone that holds a Fur Eel Pro II. It does not vacuum. You scrub with air, then follow with a vacuum.

Pick the version that matches your gun:

Your air gun Furnado version
Tornador Mini Z-007, SPTA air blaster Furnado - Tornador Mini Attachment
Hi-Tech Industries Vortex, most foreign-brand guns with a 14mm x 1.0 thread Furnado - Vortex Cleaning Gun
The Rag Company Ultra Air Blaster / Mini (you already own one) Furnado - TRC Ultra Air cone & Fur Eel Pro II kit
You need the TRC gun too TRC Ultra Air MINI combo or TRC Ultra Air Blaster combo

The Furnado cone is heat-tempered (the product pages list 200°F). Changing over is a spin-off, spin-on swap of the trumpet.

Where the Furnado works best, per the product pages: pet hair in carpet and upholstery, sand, headliners with hair, quick spot carpet cleaning, fabric seats, and cleaning out polishing pads.

Option 2: Furicane 2 (air plus vacuum in one tool)

The FURICANE 2 combines compressed air, vacuum suction and a Fur Eel Pro II in one handheld tool. Hair and sand are lifted and pulled away in the same pass, so you aren't switching between an air gun and a vacuum.

Setup, from the product page:

  • Slide the Furicane onto a vacuum hose with a 1.25 in. outside or 1.5 in. inside fitting. Adapters are available for other sizes; see which adapter fits your vacuum.
  • Quick-couple your air hose to the 360-degree swivel air inlet.
  • Secure both hoses together. A 3-pack of Velcro straps handles that.

Version 2 has a more ergonomic body and the trigger moved underneath. For step-by-step use, see How to Use the Furicane.

Furnado or Furicane?

  • You already own a Tornador, Vortex or TRC gun and a good extractor or shop vac: the Furnado is the lower-cost add-on, from $29.99.
  • You want one tool that scrubs and vacuums at once: the Furicane 2 ($59.99) avoids the switch back and forth.
  • Mobile detailers short on space: the Furicane means one tool head instead of two.

Prices as listed on buffbrite.com on Oct 26, 2026.

A pet-hair interior workflow

  1. Dry vacuum the loose debris. Get the obvious stuff out first.
  2. Blow out seams, rails and vents with your normal air tool.
  3. Air-scrub carpet and seats with the Furnado, or air-scrub and vacuum with the Furicane. Work in sections.
  4. Pull passes on fabric with a Fur Eel or the Hammerhead on a vacuum, for whatever is left on large flat areas.
  5. Crevices with the Sidewinder Crevice Tool.
  6. Extract or shampoo if the job calls for it, after the hair is out, not before. Wet hair mats down and is harder to lift.
  7. Clean your pads with the Furnado at the end of a polishing day.

Keep refills on hand

The Fur Eel wears with use, and on a busy pet-hair week you will go through them. The 3-pack and the 10 pack + Fang are sized for shops. If you light your work too, the Fur Eel Lighted Crevice Kit mounts an 800-lumen Flamethrower light on a 1.5 in. crevice tool.

Pricing pet hair jobs

Most shops charge a pet hair fee because the time adds up. Faster tools don't mean you should drop the fee. They mean the job takes less of your day, so you can fit in another car.

The short version

If you already own an air gun, a Furnado turns it into a pet hair scrubber. If you want air and vacuum in one hand, use the Furicane 2. Both run on the Fur Eel Pro II, the same silicone tool behind the more than 750,000 Buff Brite pet hair tools sold.

Back to blog

Leave a comment